Heat Sink compound is the most neglected component in high power electronics equipment. It is always required where mechanical heatsink fixation is required. Heatsink compound or Thermal Paste or Grease is a simple thing that fills up the open area spaces between the heated object and the heatsink. A proper Heat Sink compound transfers heat successfully without losing any thermal conductivity and cools down the targeted device.

Glue gun are a portable devices that utilizes and dispense hot melted adhesives in shape of tubular sticks. The heat generated from the heating element melts the adhesive and let it flow to the nozzle by pulling the trigger.  Generally, melting takes between two and five minutes, but the process may be shorter depending on whether the gun has been preheated or is already in use. In standard glue guns, the temperature of the hot melts is controlled by thermistors, thermally sensitive resistors that limit the heat current during the melting process. Low-temperature guns melt glue at 250 degrees and are suitable for delicate materials. High-temperature hot glue sticks and guns can reach 400 degrees and are only compatible for more durable or “hard” materials. Manufacturers produce dual temperature models for multiple projects. It can be used in electronics components fixing, woodworking, recreational décor, Shipment and Packaging etc.

Glue Guns are used in everyday life projects where you want to fix electronics components fixing, woodworking, recreational décor, Shipment and packaging etc. Glue gun are a portable devices that utilizes and dispense hot melted adhesives in shape of tubular sticks. The heat generated from the heating element melts the adhesive and let it flow to the nozzle by pulling the trigger. Generally, melting takes between two and five minutes, but the process may be shorter depending on whether the gun has been preheated or is already in use. In standard glue guns, the temperature of the hot melts is controlled by thermistors, thermally sensitive resistors that limit the heat current during the melting process. The Tubular sticks are Glue Stick which goes into the glue gun are important as they are the consumables in the hot gluing process so we should always have them in spares.

Soldering Irons are the most used component in all DIY electronics, you have to solder components on your perf-boards, or PCBs. Even if they are through hole type or SOT type you have to use a soldering Iron to solder them on the board. Most commonly used Soldering Iron we use 25W one which is a good trade-off between temperature produced and time taken to solder the component. You wont damage the component with high temperature and it won’t take high time like lower wattage soldering irons. But Soldering iron’s tip is the most sensitive component of it as it is prone to damage by rough handling or putting it against any hard surface. Even if it is not damaged, it will get dirty with all the residual metal scrapes and dirt which will in turn affect the soldering efficiency and may cause short circuits too. Thus, by using this stand you can prevent this from happening and ensure your soldering iron is in great working condition.

Wire cutters are important part in any electrical and electronics engineer’s kit. We have to cut the wires and remove the pvc insulating coating. If you want to solder the wires, make some electrical connections and use the connectors. This Plato 170 DIY Diagonal Plier Wire Cutter is a very useful tool when you want to cut the wire or remove the insulating coating. It is a lightweight tool and is very comfortable to hold. The lightweight spring design makes is very easy to use and last long. It has anti slip rubber coating for easy handling and usage purpose and Its cutting teeth are made up of Stainless Steel which is well suited for this job.