-
Twizzer
₹20.00- 100%Brand New and High Quality
- Long-lasting stainless steel construction
- Slender and lightweight shape with blunt ends
- Great for picking up smaller objects,stones and other general purpose uses
-
De-soldering Pump Aluminum Solder Sucker
₹99.00A metal desoldering pump is a handy tool that becomes very useful during PCB or circuit reworking. Simply heat the solder that you wish to remove and use the pump to suck in the molten solder for a clean de-soldering process. It allows you to remove components from PCB without overheating and damaging the pads.
Soldering is one of the most basic skills required to be an Electrical and electronics engineer. You need to solder different components on the PCB, solder on the joints, etc to make reliable and sturdy electrical connections for its intended working. But sometimes things can go wrong and you might end up making a wrong connection or there is excess amounts of solder on a connection that you need to remove then there is a problem! You can not take out that solder unless you are a highly skilled soldering person. To solve this problem you can use this Tin suction gun which you can use to suck out the extra tin solder you have put on the PCB or to remove that connection. It has an aluminium suction tip that provides you the sturdiness and longevity to get it to work for a long time.
-
60 watt Soldering Iron Tip
₹50.00- Power rating : 60 watt
- Material : Copper core with iron plating
- Tip shape : Normal spade
- Anti-corrosion
- Easy to replace
-
Solder wire for electrical soldering
₹80.00The main constituents of 60/40 solder wire are Tin (Sn) and Lead (Pb). This Solder wire is made of the high purity of rosin and proprietary activators which provides rapid wetting and good spreadability. This solder wire has good solderability, insulation resistance, No spattering and non-corrosive. Its composition is 60:40 of Tin and Lead respectively. Widely used in electrical and electronics, solder parts like a circuit board, electronics devices, and others. -
-
-
SIRON Soldering Iron 60W
₹200.00- Generally used for most of the components soldering.
- Branded Soldering Iron
-
30 Watt Replacement Nickel Plated Soldering Iron Bit
₹40.00This is a commonly used 5mm pointed tip for soldering. It is generally used for Through Hole components. However, being a pointed tip, it can also be used for soldering larger footprint components in Surface Mount Devices such as 1206 packages or other DPAK footprints also.
It is a replacement tip for the commonly used 5W, 8W, 12W and 25W soldering rods. The tip can be used to solder electrical wires also.
It is also nickel plated making it stable in terms of heating. It is quite stable with very low drifting even in the cold ambient temperature also
-
Glue Gun Stick
₹10.00Glue Guns are used in everyday life projects where you want to fix electronics components fixing, woodworking, recreational décor, Shipment and packaging etc. Glue gun are a portable devices that utilizes and dispense hot melted adhesives in shape of tubular sticks. The heat generated from the heating element melts the adhesive and let it flow to the nozzle by pulling the trigger. Generally, melting takes between two and five minutes, but the process may be shorter depending on whether the gun has been preheated or is already in use. In standard glue guns, the temperature of the hot melts is controlled by thermistors, thermally sensitive resistors that limit the heat current during the melting process. The Tubular sticks are Glue Stick which goes into the glue gun are important as they are the consumables in the hot gluing process so we should always have them in spares.
-
Glue Gun
₹220.00Glue gun are a portable devices that utilizes and dispense hot melted adhesives in shape of tubular sticks. The heat generated from the heating element melts the adhesive and let it flow to the nozzle by pulling the trigger. Generally, melting takes between two and five minutes, but the process may be shorter depending on whether the gun has been preheated or is already in use. In standard glue guns, the temperature of the hot melts is controlled by thermistors, thermally sensitive resistors that limit the heat current during the melting process. Low-temperature guns melt glue at 250 degrees and are suitable for delicate materials. High-temperature hot glue sticks and guns can reach 400 degrees and are only compatible for more durable or “hard” materials. Manufacturers produce dual temperature models for multiple projects. It can be used in electronics components fixing, woodworking, recreational décor, Shipment and Packaging etc.
-
Wire Cutter
₹80.00Wire cutters are important part in any electrical and electronics engineer’s kit. We have to cut the wires and remove the pvc insulating coating. If you want to solder the wires, make some electrical connections and use the connectors. This Plato 170 DIY Diagonal Plier Wire Cutter is a very useful tool when you want to cut the wire or remove the insulating coating. It is a lightweight tool and is very comfortable to hold. The lightweight spring design makes is very easy to use and last long. It has anti slip rubber coating for easy handling and usage purpose and Its cutting teeth are made up of Stainless Steel which is well suited for this job.
-
Solder Paste Flux
₹10.00Soldering or Desoldering, Flux is an important thing that was used for a long time in the electronics industry. The Flux soldering paste is a superior Flux that can be used in both cases Soldering or Desoldering.
The Soldering Flux is very useful for the longevity of the soldering. The Soldered bonding will be dirt free and tough.
However, the major problem during long term usage of soldering wire and soldering iron, the extracted fume creates problems to the eyes as well as it is very bad for health. This soldering flux is basically odor less, fume less, safe and reliable.
Project Builders
0
Cart:
₹0.00
No products in the cart.
Shop all products
