Default sorting
  • Quick View

    Arduino UNO (DIP)

    ₹599.00
    • Micro-controller : ATmega328, Analog I/O : Pins 6, Digital I/O : Pins 14, PWM Output : Pins 6
    • Clock Speed: 16 MHz, DC Current per I/O Pin : DC Current per I/O Pin: 40 mA ; r 3.3V Pin: 50 mA Operating Voltage 5 V
    • Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader, EPROM: 1 KB (ATmega328), SRAM 2 KB (ATmega328)
    • This UNO R3 Board is compatible with Arduino and is based on Atmega328. The Uno R3 can be powered via USB connection or with an external power supply.
    • The Uno R3 has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. The ATmega328 provides UART TTL (5V) serial communication, which is available on digital pins 0 (RX) and 1 (TX). An ATmega16U2 on the board channels this serial communication over USB and appears as a virtual com port to software on the computer.
  • Quick View

    Esp-32 Wifi, Bluetooth, Dual Core Chip Development Board

    ₹449.00
    • NodeMCU ESP32 Development board is based on the ESP WROOM32 WiFi + BLE Module. It is a low-footprint, minimal system development board powered by the ESP-WROOM-32 module. It can be easily inserted into a solderless breadboard.
    • High performance | Small volume, easily embedded to other products | Strong function with support LWIP protocol | Supports three modes: AP, STA, and AP+STA | Supports Lua program | Easy to develop
    • Dimensions(LxWxH):5x4x3cm
    • The NodeMCU ESP32 Wi-Fi Development Board is useful in developing Wi-Fi and BLE projects and applications. It can be directly programmed using a microcontroller.
    • SPI Flash:32mbit (default) | Current:80mA | Supply Voltage:2.2 to 3.6 V | Supports three modes:AP, STA, and AP+STA

     

  • Quick View

    Arduino UNO (SMD)

    ₹349.00
    • UNO is a micro controller board based on the ATmega328P.
    • Plug in the UNO development board and the driver will be installed automatically, simply connect it to a computer with the supplied USB cable or power it with an AC to DC adapter or battery power to get started.
    • UNO R3 new improvement, the printing on the female connector is clearer, more precise, more convenient to use wires.
    • Have 14 digital input/output pins six of which can be used as PWM outputs, 6 analogue inputs, a 16 MHZ quartz crystal.
    • Suitable for simply use the sensor, a variety of electronic components connected (such as: LED lights, buzzers, buttons, photoresistors, etc).
  • Quick View

    Node MCU ESP8266

    ₹309.00
    • Esp8266 cp2102 nodemcu lua esp-12e wifi serial wireless module
    • Built-in micro-usb, with flash and reset switches, easy to program
    • Full I/o port and wireless 802.11 supported, direct download no need to reset
    • Arduino compatible, works great with the latest arduino ide/mongoose iot/micropython
    • Weight: 8.5 gms
  • Quick View

    MG996R 180Degree Digital Metal Gear Servo Motor

    ₹299.00

    This Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (180 Degree Rotation)features metal gearing resulting in extra high 10kg stalling torque in a tiny package. The MG996R is essentially an upgraded version of the famous MG995 servo, and features upgraded shock- roofing and a redesigned PCB and IC control system that make it much more accurate than its predecessor. The gearing and motor have also been upgraded to improve dead bandwidth and centering. The unit comes complete with 30cm wire and 3 pin ‘S’ type female header connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec. 

    Important: Please note that these are not Full Metal Gear Servo motors, only the top gear comes in metal.  

    WIRE CONFIGURATION :

    • RED    –   Positive
    • Brown – Negative
    • Orange – Signal (PWM)
  • Quick View

    Arduino NANO with Cable

    ₹280.00
    • Powered via the Mini-B USB connection
    • 14 digital pins on the nano
    • 8 analog inputs all with 10 bits of resolution
  • Quick View

    L293D Motor Shield

    ₹250.00
    • L293D is a monolithic integrated, high voltage, high current, 4-channel driver.
    • 2 interface for 5V Servo connected to the high-resolution dedicated timer – no jitter!
    • Can drive 4 DC motors or 2 stepper motors or 2 Servo
    • 4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 36V DC
    • Package Content: 1x L293D Motor Drive Shield.
  • Quick View

    5v 4 Channel Relay Module

    ₹210.00
    • This 4-channel relay module can be used to control various appliances, and other equipments with large current. It can be controlled by a number of microcontrollers such as Arduino, AVR, PIC, ARM. It is ideally suited to controlling larger voltages in your project through Wi-Fi. This can also be used to drive high power motors.
    • Number of channels:4 Relay Operating Voltage:3.3V to 5V Switching Voltage (VAC):250@10A Switching Voltage (VDC):30@10A Trigger Voltage (VDC):5 Trigger Current (mA):20 DC or AC signal, control, you can control the 220V AC load Trigger mode: High level
  • Quick View

    L298 Motor Driver

    ₹200.00

    Microcontroller that normally operates on 5V or 3.3V cannot be directly used to control a DC motor operating on higher voltage and current rating. This is why we commonly use Motor Driver modules like the L293D Motor Driver Module and the L298N Motor Driver Module. While the L293D motor driver module can be used for basic low current application the L298N Motor driver module is a high current motor driver with some additional features that are commonly used with Arduino and Raspberry Pi for Robotics applications.

    The L298N Motor Driver module is based on the L298 Dual Full-Bridge Driver IC and can control the speed and direction of two DC motors (Motor A and Motor B) simultaneously. The voltage rating of these motors can be between 5V to 35V and the peak current value can be up to 2A.

  • Quick View

    16×2 LCD Display

    ₹130.00
    • LCD display module with Yellow Backlight
    • SIZE : 20×4 (2 Rows and 16 Characters Per Row)
    • Built-in industry standard HD44780 equivalent LCD controller
    • Commonly Used in: Student Project, Collage,copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices
    • Operate with 5V DC LCD type: Characters
  • Quick View

    5v 2 Channel Relay Module

    ₹120.00
    • Content: 1x 2 channel 5v relay module
    • Supply voltage: 5v DC
    • Current: 100ma
    • Load: 250v 10a AC or 30v 10a dc
    • Contact Current Rating: 10 Amps
  • Quick View

    Servo Motor

    ₹120.00

    The Tower Pro SG90 9g mini servo motor is the most commonly used servo motor in RC applications. The servo motors are used for control applications which require precision control like robot arm positioning, tool position in machining equipment. The servo motors usually provide control over 180° range. This angular position control is performed by PWM technique so by varying its duty cycle you can control the angular position of the motor. This servo motor can lift a maximum of 1.6 kg when suspended at 1cm distance from the shaft. It can also be used in robotic arm, CNC machine, Steering systems on RC cars and other robotic or automation applications as well.

    Specifications

    • Operating Voltage: 3V to 7.2V
    • Stall torque @4.8V: 1.2 kg-cm
    • Stall torque @6.6V: 1.6 kg-cm
    • Gear Type Plastic
    • Weight of Motor 9gms