-
BO Motor Wheel
₹30.00- The 65MM Wheel is made up of high-quality rubber.
- Car hub is reinforced nylon | Sturdy | Tire with sponge liner for more strength | With upgraded tire tread for greater friction
- Diameter of wheel:65 mm Center Shaft Hole Diameter (mm):5.4 (Round edge) and 3.5 (Flat edge)
- The 65 mm wheel is only compatible with BO motor.
- Loading Capacity (kg):2.5 D hole For BO Motor (mm):6
-
Arduino UNO Data Cable
₹39.00- WIDE COMPATIBILITY: The Printer Cable is compatible with common devices with USB type B connector like Arduino, Blue, Brother, Canon, CyberPower, Dell, Epson, Fujitsu, HP, IOGEAR, Lexmark, M-Audio, and Samsung.
- HIGH SPEED TRANSFER: Up to 480 Mbps transfers data speed for USB 2.0/3.0 devices, the printer cable is backwards compliant with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps).
- Mac & PC Compatible with devices such as a multifunction, laser or thermal printer, desktop document scanner, midi controller, midi keyboard, DAC, snowball mic, development board
-
5v Single Channel Relay Module
₹55.00- The 1-channel 5V control Single-Pole Double-Throw (SPDT) High-level trigger AC power relay board can be controlled directly via a microcontroller. It can switch up to 10A at 250 VAC. The inputs are isolated in order to protect any delicate control circuitry.
- Low level trigger mode | Pull down circuit to avoid malfunction | Triode drive | High impedance controller pin | Compliant with international safety standards | Power supply indicator lamp | Control indicator lamp | Indicator for relay output status
-
Arduino UNO Case Transparent Clear
₹60.00Upgrade your Arduino UNO R3 board’s protection and aesthetics with this transparent plastic case enclosure. Specifically designed for the Arduino UNO R3, this case provides a clear cover to shield your board from dust, debris, and potential damage while allowing you to easily view your projects in action.
-
BO Motor
₹79.00- The 150 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a low-cost geared DC Motor. It is an alternative to metal gear DC motors.
- Low density | Lightweight | Low inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Inherent lubricity | Relatively low coefficient of friction
- Shaft length:7 mm Motor Design:L-Shaped Shaft Diameter:5.5 mm Size:55x48x23 mm
- The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car.
-
-
Keypad
₹110.00- Connector: DuPont 8 pins, 0.1 Inch (2.54mm) pitch
- Peel off the white sticker on the back of the keyboard, can be securely affixed to the surface of the chassis
- Operation temperature: 20 to plus 40 degree Celsius
-
Servo Motor
₹120.00The Tower Pro SG90 9g mini servo motor is the most commonly used servo motor in RC applications. The servo motors are used for control applications which require precision control like robot arm positioning, tool position in machining equipment. The servo motors usually provide control over 180° range. This angular position control is performed by PWM technique so by varying its duty cycle you can control the angular position of the motor. This servo motor can lift a maximum of 1.6 kg when suspended at 1cm distance from the shaft. It can also be used in robotic arm, CNC machine, Steering systems on RC cars and other robotic or automation applications as well.
Specifications
- Operating Voltage: 3V to 7.2V
- Stall torque @4.8V: 1.2 kg-cm
- Stall torque @6.6V: 1.6 kg-cm
- Gear Type Plastic
- Weight of Motor 9gms
-
5v 2 Channel Relay Module
₹120.00- Content: 1x 2 channel 5v relay module
- Supply voltage: 5v DC
- Current: 100ma
- Load: 250v 10a AC or 30v 10a dc
- Contact Current Rating: 10 Amps
-
16×2 LCD Display
₹130.00- LCD display module with Yellow Backlight
- SIZE : 20×4 (2 Rows and 16 Characters Per Row)
- Built-in industry standard HD44780 equivalent LCD controller
- Commonly Used in: Student Project, Collage,copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices
- Operate with 5V DC LCD type: Characters
-
L298 Motor Driver
₹200.00Microcontroller that normally operates on 5V or 3.3V cannot be directly used to control a DC motor operating on higher voltage and current rating. This is why we commonly use Motor Driver modules like the L293D Motor Driver Module and the L298N Motor Driver Module. While the L293D motor driver module can be used for basic low current application the L298N Motor driver module is a high current motor driver with some additional features that are commonly used with Arduino and Raspberry Pi for Robotics applications.
The L298N Motor Driver module is based on the L298 Dual Full-Bridge Driver IC and can control the speed and direction of two DC motors (Motor A and Motor B) simultaneously. The voltage rating of these motors can be between 5V to 35V and the peak current value can be up to 2A.
-
5v 4 Channel Relay Module
₹210.00- This 4-channel relay module can be used to control various appliances, and other equipments with large current. It can be controlled by a number of microcontrollers such as Arduino, AVR, PIC, ARM. It is ideally suited to controlling larger voltages in your project through Wi-Fi. This can also be used to drive high power motors.
- Number of channels:4 Relay Operating Voltage:3.3V to 5V Switching Voltage (VAC):250@10A Switching Voltage (VDC):30@10A Trigger Voltage (VDC):5 Trigger Current (mA):20 DC or AC signal, control, you can control the 220V AC load Trigger mode: High level
Project Builders
0
Cart:
₹0.00
No products in the cart.
Shop all products
